NOT FOR RESIDENTIAL USE, COMMERCIAL APPLICATIONS ONLY!

     

 

 

How much does just one slip/fall on a wet surface cost your property?

We now live in an age of litigation, skyrocketing insurance premiums, workman's compensation,

adverse public relations and compliance with the ADA. FloorSafe® will address these concerns for you!

 

Nationwide on-the-job accidents from slips and falls are estimated to cause 100,000 disabling injuries per year at a direct cost (Indemnity benefits and medical expenses only) of over $250,000,000. In addition there are over 3500 deaths each year that may be attributed to slips and falls. Such accidents are a risk in any commercial building, but are most serious where water on quarry tile floors can make walking surfaces as slippery as ice.

 
bullet

FloorSafe® will reduce the incidence of slips and falls on quarry/ceramic tiles by raising the coefficient of friction. - on bathroom floors, in kitchens, restaurants, swimming pools, food & beverage processing plants and any other areas where quarry and ceramic tile floors can present slip problems. FloorSafe® is safe, easy, self applied (takes less than 15 minutes per 400 s.f.), in use for over 31 year, environmentally  safe and most important affordable. (Click here for worksheet to compare YOUR cost of slip/falls vs. using FloorSafe)!

bullet

FloorSafe® is a unique anti-slip floor treatment that has been specifically developed for self application on quarry/ceramic tile floor areas that are subject to water. This anti-slip treatment forms an invisible microscopic tread design in the surface of the ceramic/quarry tile. (does not contain hydrofluoric, hydrochloric or sulfuric acids.)

bullet

When applied, FloorSafe® forms an integral part of the ceramic/quarry tile, leaving a highly slip- resistant floor surface. The floor surface is then cleaned with normal cleaning methods. Reapply FloorSafe® only when the floor needs more grip.

bullet

You may be able to receive tax credits for making your floors compliant with the American with Disabilities Act (ADA). Always check with your Accounting firm to see if applicable.

bullet

 

              FloorSafe® Benefits...

bullet

Greatly reduces the risk of slip/fall accidents by raising the  coefficient of friction.

bullet

Applied by your own personnel in minutes, requires no special tools, no odors

bullet

No Downtime the floor is ready to walk on once treated

bullet

Contains chelating agents to ensure characteristics are evenly spread does not distort.

bullet

Extends the life of the grout by eliminating fungi and bacterial growth.

bullet

Not harmful to stainless steel and aluminum.

bullet

No significant change to the appearance of the floor surface.

bullet

Economical. Each gallon will cover approximately 300-400 square feet of quarry / ceramic tile and will last for months or even years. 

bullet

Environmentally safe and Patented technology! Will not harm pipes or drain

bullet

Not a coating that wears off in a few months!

bullet

Less then 8 CENTS ($.08) a square foot!

bullet

Can you afford NOT to use FloorSafe®?

Only $49.99/gal.*

4 gal/case $199.96 plus s/h

3 case minimum     Need 1-2 cases? Call Us  

 Each case will treat 1600-2000 sq. ft. 

(149-186 sq. meters)

 

 For more information or to order call us: 310-428-4567

 

Click Here To Order a FloorSafe® Test Kit

(treats up to a 2'x 2' area) 

only $9.99 (plus $6.00 s/h) USA  Only

We know you will love the results of FloorSafe®, but if you are not satisfied, we will refund your testing purchase (excluding s/h).

 

International Clients Click Here To Order

 

YOU MUST INCLUDE THE NAME AND ADDRESS OF YOUR PROPERTY ON  THE ORDER FORM!

 

NOT FOR RESIDENTIAL USE

 

DO NOT BE FOOLED BY IMITATIONS OR SO CALLED COPYCAT PRODUCTS! FloorSafe® Anti-Slip Treatment by Stop Slipping is the original Anti-Slip Bathtub/Shower Treatment. We have been manufacturing and selling anti-slip bathtub/shower and floor treatments direct to clients for over 31 years. (click for history)

 

Q. How does FloorSafe® Anti-Slip work?
A. FloorSafe® chemically forms an invisible microscopic tread design in the surface of mineral based materials (i.e., quarry, ceramic, porcelain, marble and terrazzo tiles) which raises the co-efficient of friction. (does not contain hydrofluoric, hydrochloric or sulfuric acids.) (Not recommended for bathroom tiles see our TubSafe page).


Q. What is co-efficient of friction?
A. Simply stated: Greater pressure in the presence of water now lessens the chance of slipping, where before it increased it.

Q. May I anti-slip my floors as easily as I did my bathtubs/showers with TubSafe®?
A. Tiles can be made anti-slip just as easily by using FloorSafe®.  Due to the fact that ceramic tiles are available in a vast number of qualities, it will take a little pre-testing to determine exact time needed to provide the correct amount of anti-slip properties to ceramic tiles. High gloss marble and terrazzo may be treated, but a small portion of their gloss/sheen may be lost. These materials should only be treated if slip/falls are paramount and the aesthetic appearance is a minor-issue.

Q. What, if any, will diminish the effects of FloorSafe®?
A. Grease, vegetable/animal fats and improper cleaning. Since a microscopic tread design has been created, it must be kept clear of any buildup. With good housekeeping procedures this should not present any significant problem.

Q. May I apply more FloorSafe® to a floor that is not always cleaned well.
A. Yes, FloorSafe
® has been formulated to be re-applied whenever "grip" is lessened because of grease and/or dirt build-up or use our Main-Tain® Anti Slip Rejuvenator.

Q. Is my floor now harder to clean?
A. No, with proper cleaning the floor is no harder to maintain than before.

Q. Should I seal my floor after using FloorSafe®?
A. No. Most topical sealers and waxes "fill in" the microscopic tread design and lead to a slippery floor surface again.

Q. How long will the anti-slip last?
A. Since the treatment is now part of the surface of the flooring material, it is dependent on how much abrasion from traffic and footwear the floor material is exposed to. In area with very little exposure to abrasion, the treatment will last years. While in heavy traffic areas, such as entries and common areas the anti-slip may last only a few months and need to be re-applied.

Q. What about companies that "sell" installed "so-called" non-slip  products?
A. Many companies offer an installed product. This involves bringing their own people or subcontracting laborers into your facility which is costly, creates logistic problems as well as a cash burden. If you have determined that your own people cannot "wash" a floor, or follow a 1 step procedure then by all means the other alternatives should be looked into.

Q. What about the 3 - 5 year warrantees claimed by these companies?

A. It is our opinion that it is entirely dependent on location, traffic, footwear and maintenance. Since these variables are extensive, it is not prudent for us to issue what we believe are exaggerated warrantee periods. FloorSafe® is no more expensive than a good cleaning product and affordable to reapply when/if necessary (
click to read about Main-Tain®).

 

 

TubSafe    More about TubSafe    About FloorSafe    About Main-Tain    ASTM     ADA    Who we are    Commentary    Email

 

Stop Slipping Phone 310-428-4567  Email: information@stopslipping.com     LOCATED in CA & NJ

CELEBRATING OUR 31ST ANNIVERSARY OF HELPING REDUCE SLIP AND FALL CONCERNS

 Proudly Made in the USA 

We retain the right not sell to any individual, company or entity